Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int eth0/0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shu
%LINK-5-CHANGED: Interface Ethernet0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0/0, changed state to up
Router(config-if)#ex
Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
w
Building configuration...
[OK]
Router#ex
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int eth0/0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shu
%LINK-5-CHANGED: Interface Ethernet0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0/0, changed state to up
Router(config-if)#ex
Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
w
Building configuration...
[OK]
Router#ex
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int eth0/0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shu
%LINK-5-CHANGED: Interface Ethernet0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0/0/0, changed state to up
Router(config-if)#ex
Router(config)#ex
Router#
%SYS-5-CONFIG_I: Configured from console by console
w
Building configuration...
[OK]
Router#ex
Posted by:
Published :
Terimakasih banyak karena sobat telah membaca artikel . Sobat bisa bookmark halaman ini dengan URL . Jika ingin memposting ulang artikel ini harap untuk mencantumkan link sumber.